BSOD = Blue Screen Of Death<\/p>\n
STOP: 0x0000000A STOP: 0x0000001E STOP: 0x00000050 STOP: 0x0000007B STOP: 0x0000007F STOP: 0x0000009F STOP: 0x000000D1 STOP: 0x000000EA STOP: 0x00000024 STOP: 0xC0000218 STOP: 0xC0000221 STOP: 0x0000008e<\/strong> BSOD = Blue Screen Of Death STOP: 0x0000000A IRQL_NOT_LESS_OR_EQUAL This Stop error, which can be caused by either software or hardware, indicates that a kernel-mode process or driver attempted to access a memory location it did not have permission to access or a memory location that exists at a kernel interrupt request level (IRQL) that … Continue reading Common BSOD Errors in Windows 2000 XP<\/span>
\nIRQL_NOT_LESS_OR_EQUAL<\/strong>
\nThis Stop error, which can be caused by either software or hardware, indicates that a kernel-mode process or driver attempted to access a memory location it did not have permission to access or a memory location that exists at a kernel interrupt request level (IRQL) that was too high. A kernel-mode process can access other only processes that have an IRQL that’s equal to or lower than its own.<\/p>\n
\nKMODE_EXCEPTION_NOT_HANDLED<\/strong>
\nThis Stop error indicates that indicates that the Windows XP kernel detected an illegal or unknown processor instruction. The problems that cause this Stop error can be either software or hardware related and result from invalid memory and access violations, which are intercepted by Windows’ default error handler if error-handling routines are not present in the code itself.<\/p>\n
\nPAGE_FAULT_IN_NONPAGED_AREA<\/strong>
\nThis Stop error indicates that requested data was not in memory. The system generates an exception error when using a reference to an invalid system memory address. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop error.<\/p>\n
\nINACCESSIBLE_BOOT_DEVICE<\/strong>
\nThis Stop error indicates that Windows XP has lost access to the system partition or boot volume during the startup process. Installing incorrect device drivers when installing or upgrading storage adapter hardware typically causes this Stop error. This error could also indicate a possible virus infection.<\/p>\n
\nUNEXPECTED_KERNEL_MODE_TRAP<\/strong>
\nThis Stop error indicates a hardware problem resulting from mismatched memory, defective memory, a malfunctioning CPU, or a fan failure that’s causing overheating.<\/p>\n
\nDRIVER_POWER_STATE_FAILURE<\/strong>
\nThis Stop error indicates that a driver is in an inconsistent or invalid power state. This Stop error typically occurs during events that involve power state transitions, such as shutting down, or moving in or out of standby or hibernate mode.<\/p>\n
\nDRIVER_IRQL_NOT_LESS_OR_EQUAL<\/strong>
\nThis Stop error indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by faulty or mismatched RAM or a damaged pagefile.<\/p>\n
\nTHREAD_STUCK_IN_DEVICE_DRIVER<\/strong>
\nThis Stop error indicates that a device driver problem is causing the system to pause indefinitely. Typically, this problem is caused by a display driver waiting for the video hardware to enter an idle state. This might indicate a hardware problem with the video adapter or a faulty video driver.<\/p>\n
\nNTFS_FILE_SYSTEM<\/strong>
\nThis Stop error indicates that a problem occurred within Ntfs.sys, the driver file that allows the system to read and write to drives formatted with the NTFS file system. (A similar Stop message, 0x00000023, exists for the file allocation table [FAT16 or FAT32)] file systems.)<\/p>\n
\nUNKNOWN_HARD_ERROR<\/strong>
\nThis Stop error indicates that a necessary registry hive file could not be loaded. The file may be corrupt or missing. The registry file may have been corrupted due to hard disk corruption or some other hardware problem. A driver may have corrupted the registry data while loading into memory or the memory where the registry is loading may have a parity error.<\/p>\n
\nSTATUS_IMAGE_CHECKSUM_MISMATCH<\/strong>
\nThis Stop message indicates driver, system file, or disk corruption problems (such as a damaged paging file). Faulty memory hardware can also cause this Stop message to appear.<\/p>\n
\nThis is usually an issue with RAM, but it all depends on the system. Most often it will happen with Windows XP SP2.<\/p>\n","protected":false},"excerpt":{"rendered":"